RE: Re: RE: RE: Homebrew Intakes

From: Steven St.Laurent (Saint1958@home.com)
Date: Sun Nov 05 2000 - 17:41:55 EST


The cost for a bending machine is 199.00 from Harbor Freight. 6 foot length
pipe is 13.00 (3" stainless steel).

---------------------------------------------------
Steve St.Laurent
2000 Dakota 4.7L, CC, Soon to be Supercharged
1999 Chebby gone in 2003
1993 Suzuki Tracker (Geo) 1.6L
COMING SOON
2003 Aspiring for a V-10 GTS-R
2003 Dodge Dakota 5.7 Hemi R/T

-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Tanner Sammons
Sent: Sunday, November 05, 2000 1:09 PM
To: dakota-truck@BUFFNET.NET
Subject: DML: Re: RE: RE: Homebrew Intakes

I may be coming in late with this post, but I will let it fly anyway. I was
thinking about having an exhaust shop bend some 3" pipe for me, but there is
no one in the area that can do mandrel bends on pipe as big as 3". What I
did do is have the shop order in 45 & 90 degree mandrel bent elbows to see
if they would fit from the air hat to the cone filter. I took the 45 home
and it didn't quite work, I was going to pick up the 90 when the post came
over the DML for the Z tube for cheap $$. Well that failed, but back to
the shop. The pieces were around $22 a piece. I contacted Jet-Hot about
coating the pipe. The guy quoted me around $15 per foot and it will take 2-3
days to do. Not bad I thought, still may do it. If you are interested in
Jet-Hot, give them a call and they will answer all of your questions and
send you some literature and a video about their products.
HTH,
Tanner
----- Original Message -----
From: "Kyle Kozubal" <grndak4x4@home.com>
To: <dakota-truck@BUFFNET.NET>
Sent: Saturday, November 04, 2000 6:42 PM
Subject: DML: RE: RE: Homebrew Intakes

> > You could just go to a exhaust pipe shop and have them bend a 3" mandrel
> > aluminum piping.
>
> I thought about this, just not sure how much it would cost. I mean the
> length of 3" pipe needed couldnt(shouldnt) cost more than $15. Possibly a
> very minimal charge for bending the pipe. It would be really nice to have
a
> 3" pipe bet up and them even ceramic coated(better temp control and
looks).
> Because of the PVC shattering thing brought up, I am going to start
> researching custom pricing on a metal tube. Especially since I live in a
> very cold area, I dont want it to become brittle and crack with the heat
of
> the engine bay. Since my Dak is a GenII using a GenIII airhat, I cannot
buy
> the 'intake' tubes, cause I would need a custom job. I am hoping to just
> take in my fabbed up piece of PVC pipe into an exhaust shop and see what
> they can do for me. Would Jet-Hot(www.jet-hot.com/index.htm) do this small
> of job?
> Kyle
> 93 Dakota 4x4 V6
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:06 EDT