Thanks. How I do remove the shielding Austin?
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: DICEMAN469@aol.com [mailto:DICEMAN469@aol.com]
Sent: Wednesday, November 08, 2000 8:10 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Torque Converter Question
In a message dated 11/8/00 3:58:05 PM !!!First Boot!!!, Hemipower@aol.com
writes:
> << When revving the motor you can hear a rattling sound when the motor
almost
> reaches idle. The sound is coming from the front part of the tranny.
Could
> it be the torque converter?
I had the same sound, I removed the shielding on the lower part of the
bellhousing, and it went away. That's probably what it is with you as well.
-Austin
Vipertruck
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:10 EDT