what kind of guage is it bob? mechanical or electrical
later
Scott Miller
89 Shelby Dakota #322 - 360 C.I. V8 (12.25 @ 112.41 mph) "FASTDAK"
94 Dakota Sport - 3.9 V6 5-Speed (15.86 @ 84 mph)
----- Original Message -----
From: Bob Tom <tigers@bserv.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, November 18, 2000 4:12 PM
Subject: DML: Fuel Pressure Gauge
> Daksters that have installed a FP gauge:
>
> I finally got my FP gauge installed (had a tough time because
> the '97 does not have a pressure relief valve, and had to
> find fittings for a clean rig).
>
> Problem: everything seems to work except that the gauge
> doesn't show pressure. Backlight is aok. Power off and
> needle sits at highest pressure marker = aok. Power on
> and needle jumps to 0 = aok. Start engine and zip, needle
> does not move off 0. I've tested the sender unit manually
> with a hand held gauge and it shows 42 psi.
>
> Any suggestions, opinions, guesses???
>
> Thanks ... getting slower and slower daily = me, not the Dak.
>
> Bob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:28 EDT