The rotors are separate from the hub and bearings on my 4x4.
You just take off the wheel and caliper and the rotor pulls off.
I think the bearings are sealed and you have to buy new ones to replace
them. Hop.
> Y2KDakuda@aol.com writes:
>
> > has any one replaced the rotors on a 97-01 Dakota. I need to know what I
> need
> >
> > to do this. i have a set of powerslot rotors waiting to go on. I was
told
> > that the bearing are pressed on the rotors and that I will need new
> bearings
> >
> > to do the job and the dealer told me they run 153.00 each can any one
tell
> > me
> > what I need to do.
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:30 EDT