Does anyone have any opinions yet on how these plugs would work on a 97,
318?
Thanks
Jay
-----Original Message-----
From: Aajaynefour@cs.com <Aajaynefour@cs.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Sunday, November 26, 2000 11:47 PM
Subject: DML: Observations on spark plugs for the 4.7
>Well,
>
>I went plumb loco and bought a set of Bosch +4's (P/N 4418) for the 4.7
based
>in part on the comments of a fellow DML'er (forget exactly who) and the
>claims of Bosch. The fellow DML'er mentioned that the semi-hemi design of
>the 4.7 seems to lend itself to the +4 design and that his best track times
>were had with this plug. The "open" nature of the plug presents the spark
to
>the air/fuel mixture with less obstruction than a conventional plug without
>indexing. Hummm? Seems to work.
>They don't ping, the idle and pull of the motor is smoother, and the
>subjective butt-dyno perhaps feels some additional pull.
>
>As the search for a good plug for the 4.7 continues I wanted to give my
>impression of the Bosch +4 plugs. This one might be good.
>
>Andrew
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:37 EDT