Did you pull the codes from the computer? I had this problem once after
cleaning my TB. I had cleaned the IAS and it hadn't completely dried out
yet. Computer was dumping all kinds of codes saying the MAP, IAS and TPS
reading didn't jive.
-----Original Message-----
From: Casey Aldridge [mailto:caldridge@uswest.net]
Sent: Tuesday, November 28, 2000 8:01 PM
To: DML
Subject: DML: FW: Stall condition?
Hey guys and gals...quick question for you all...for those of you who dont
know
who I am...I have '97 RC V6 with a powerdyne sc'er...anywho..lately the
truck has
been doing some weird stuff. When i start the truck in the morning or after
it has set
a while without running and I try to start it...it fires right up and then
the idle just
drops and it dies. If I hold my foot on the gas it stays running just fine,
but as soon
as I let off of the gas it dies. To remedy this...I have to slowly let my
foot off the gas
and let it kinda stumble and rough idle for a sec and then it seems to pick
up and idle just fine.
Anyone have any ideas?
thanks
==============================================
Casey Aldridge
Tempe, AZ
'97 RC V6 Auto 3.55 One Side Fire
Autolite 3923's, 180* T-stat, Ported TB
Electric Fan (stock fan removed)
Powerdyne 6psi Supercharger
Dodge Tonneau Cover, Body Color Dash
R/T Rims riding on BFG COMP T/A ZR4
255/50ZR17's, Kenwood Deck, Fosgate Amp
Fosgate 12" Punch XLC
16.311 @ 85 MPH, EST. 4100lbs w/driver
============================================
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:44 EDT