Can't tell you much on Gen-II's but Gen-III's have no nuts, just bolts.
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of ron chapell
Sent: Wednesday, November 29, 2000 6:19 AM
To: dakota-truck-moderator@twisted.twistedbits.net
Subject: DML: Question on body mounts for GenII Dak
I was in the process of putting nerf bars on my dak came to a problem. How
do you get to the nut of the body mount in front of the cab. I hope that
there is a nut on that bolt or else I broke something. I can't tighten it
nor loosen it anymore. I looked under the carpet inside for a removable
access panel and there was nothing. The only thing i can figure is that you
have to remove the inner wheel well. I ran out of time and had to make a 4
hour trip home last night so i didn't get a chance to really look into it.
Any ideas? Maybe someone with a FSM ( I really need to get one of those!)
TIA.
Ron Chapell
95 DSCC 4x4 5.2L 5-Spd
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:44 EDT