Steven
You can get em from Marty... He was going to run mine side by side the
Magnum Perf unit but I didnt get it to him in time... Differetn dyno runs
can produce different results. The truck was a BONE stock 318 with a
catback. IMO Marty could have put a GENII on it for a better comparison,
(no limiting with the air inlet) but... Everyone should remember that
installing a TB isnt like putting on a Supercharger (Its a lot easier, but
you DONT get 100 hp out of it...). IMO its a necesary part of a good engine
build up and will augment most every mod you do, but its still not a silver
bullet...
Ive seen the TB250 from Jules and it is a beautiful piece of work! Its kinda
pricey though. I know how much it costs me to make these guys from scratch.
Bruce
----- Original Message -----
From: Stlaurent Mr Steven <STLAURENTS@mctssa.usmc.mil>
To: <dakota-truck@BUFFNET.NET>
Sent: Wednesday, November 29, 2000 7:54 AM
Subject: RE: DML: RE: Mag. Performance TB dyno results
> Hahahhahaha. 1400.00 dollars for 6HP? I don't think so. I wonder who
makes
> his billet TB? Flowmetrics?
>
> -------------------------------------------
> Steven St.Laurent
> Test Engineer
> Test Branch, GSD, MCTSSA
> MARCORSYSCOM, USMC
> 760-725-2506 (DSN 365-2506)
> Work:mailto:stlaurents@mctssa.usmc.mil
> Home:mailto:saint1958@home.com
>
>
> -----Original Message-----
> From: frank golembieski [mailto:editzero@yahoo.com]
> Sent: Wednesday, November 29, 2000 12:41 AM
> To: dakota-truck@BUFFNET.NET
> Subject: Re: DML: RE: Mag. Performance TB dyno results
>
> ??? i looked at my magnum performance catalog a few
> times ( can give page #s off the top of my head ) and
> i don't remember a $1400 TB ?
> --- "Bernd D. Ratsch" <bernd@texas.net> wrote:
> >
> > "Well, how about 6 ft/lbs of torque and 4 horsepower
> > on the Dyno for the
> > Magnum Performance $1400 throttle body?!?! The
> > customer tried to return it
> > with no success. Apparently, "Satisfaction
> > Guaranteed" means that the TB
> > porter was satisfied with his work and check for
> > $1400! Be careful in the
> > decisions you make for performance with your Magnum!
> > Stick with the new CNC
> > Billet TB's!"
> >
> > That's all I could find. Where's the Dyno sheet?
> > Where's the test
> > procedure(s)? And...where's the baseline? (Not to
> > defend anyone...but the
> > statement is pretty vauge.)
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@BUFFNET.NET
> > [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of
> > Chuck Robbins
> > Sent: Tuesday, November 28, 2000 9:55 PM
> > To: dakota-truck-moderator@twisted.twistedbits.net
> > Subject: DML: Mag. Performance TB dyno results
> >
> >
> > "6 ft/lbs of torque and 4 horsepower on the Dyno"
> >
> > Results from a Magnum Performance $1400 throttle
> > body. I don't know how it
> > was tested. Check out more related info at
> > http://members.spree.com/business/krcperform/
> >
> > --
> > Chuck Robbins
> > '99 Intense Blue Sport
> > www.intense99dak.com
> >
> >
> >
>
>
> =====
> Frank G
> http://members.onecenter.com/autoworld/dakota/index.html
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:45 EDT