Ron,
Yes, you can cut thru 1/16" sheet metal with a hole saw. You just have to
have a good grade of hole saw made for metal. It has to turn at a slow rpm
and be lubricated with oil. It's messy and noisy too. it'll start to chatter
and you can't hear yourself think. I hate to do it but I will.
That's the way I got the nitrous line inside the cab of the "yota". Up
thru the floor behind the passenger seat. Bill
SEMIHEMI01@AOL.COM (Bill C.) 2001 QC, 4.7L, 5spd. 3.55 LSD
K-N + Cool-Air, Quick-D TB, 10w-30 MOBIL 1, 180 T'STAT, SilBlades
GIBSON 3" Single Side-Swept cat-back, G-TECH, <A
HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:06 EDT