Yes on the 40 series DeltaFlow and no on the 2.5 dual rear exhaust. He has
the 3 inch side exhaust on a the fastest 4.7 regular stock cab Dakota.
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: Viper450hpGTS@aol.com [mailto:Viper450hpGTS@aol.com]
Sent: Friday, December 22, 2000 7:16 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Flowmaster on a 4.7L
What year is his truck? I doubt you could feel 2hp in the seat of the pants.
I definately got a boost in the rear end from my set-up. Especially the
torque between 3000 and 4500 rpms. Anyways, mine uses 3" piping from the
cat-back, into a 3" inlet and dual 2.5" outlets. A single 3" inlet/outlet
would probably be best for making power, but I wanted the dual exhaust
'look". Is the one he tested a straight 40 series or the Delta Flow?
James
'99 Flame Red RC Dakota R/T (8psi ATI Procharger)
'01 Black 4.7L RC Dakota Sport (5-speed & 3.92 gear)
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:06 EDT