Patrick
I was wondering if you would sell just the SS shaft, blades,
and screws. If so how much?
Thanks
> http://members.aol.com/kabuki2/stage1b.jpg
>
> This is my throttle body @ WOT. Notice there is a significant decrease in
> the
> amount of material in the cross section of the throttle bore. Bores opened
> to
> 50mm, new precision machined stainless steel shaft and blades (which are
at
> http://members.aol.com/kabuki2/ssshaft.jpg - this is a picture of the new
> parts seperate, before assembly), airhorns are opened up to their optimum
> angle, new stainless blades are bored to sink the flathead machine screws
> into the shaft, which is ~50%+ the size of the stock unit.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:32 EDT
