But if you do that wouldn't you want to go through the heads, including
valves, springs, etc.?
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of mike d.
Sent: Sunday, January 21, 2001 4:49 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: Crower Rollerized Rocker Arms - Gibson stainless
headers
>>I am thinking about installing Crower Rollerized Rocker Arms 1.7:1 ,and
Gibson stainless headers and was looking for input on these products<<
The headers are good products, but for the money you'll put into those
Rockers, you could buy a cam and have it installed and make more power...
just my $0.02
-miggity
PROJECT 13's --> slammed 88 Dakota / 360 swap in progress!!
miggitymike@fast4x4.net
http://surf.to.Project13s
"STOCK SUCKS!"
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:39 EDT