Ok, I lucked up and found an 89 Dodge Ram with a TBI 318 in it yesterday. I
checked in the Shelby I just acquired, and the wiring harness for the TBI is
still there, I looked and so is the computer. So I stopped and scratched my
head a little bit, crawled under the dash and looked, and sure enough,
someone had clipped the lead that goes tot eh check engine light. So I
simply crimped it back together, turned the key, and viola! I now have a
check engine light blaring at me! My question is, since they are both a 318,
will the tb and intake lift off the Ram and fit on the Shelby? Are there any
sensors I need to change? I will probably change all the sensors on it
anyway just to be safe as this Ram appears to have been an old farm truck
since the bed is beat up pretty bad and has rust holes in several spots,
along with the faint odor of chit. :xo Anyway, if y'all say it will fit and
work fine, I will go back and get it today. I already called the guy this
morning and he is holding it for me till I get back with him, but he gave me
a 3 day limit. Thanks alot guys, y'all are really helping my dream of owning
one of each year model Dakota come to life! And yes, I have checked around,
there is no Dakota-aholics Anonymous around here. ;o)
Will
96 Paxton huffed NOS intercooled 408 Dakota
NEW!!!: 89 Shelby Dakota
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:40 EDT