Sounds like you have to adjust the screw by the throttle body. Go to
www.dakotart.com and ask this question and they can direct you to the page
so you can do it.
----- Original Message -----
From: "John Miller" <millerj002@hawaii.rr.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, January 24, 2001 8:22 PM
Subject: DML: Shifting Problem or Just me?
> Help,
>
> I am bascially illiterate when it comes to working on my truck but am
slowly
> learning through the DML. I have a question concerning my 2001 CC R/T.
It
> seems that if I floor it from a dead stop it doesn't want to shift out of
> first. I tried this last night and it went to around 6k rpm's before I
> backed it off to 2k rpm's and it shifted. My truck has done this a couple
> of times before. Shouldn't it shift by itself? I have never had this
> happen on any other vehicle that I have owned. Any suggestions? The only
> modifications I have done to the engine is to add an intense performance
> stage II intake.
>
> TIA,
>
> John Miller
> 01 Black CC R/T
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:42 EDT