With some effort, you can move it by hand.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Kyle Kozubal
Sent: Saturday, January 27, 2001 11:23 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: Serp. Belt Ilder/Tensioner
> Shouldn't be all that hard. I believe it's a 5/8" head on the bolt and
you
> can use a ratchet (or long box-end wrench) to move it.
Ok so I should be able to move it by hand once it is all bolted down. I just
want to make sure the spring isnt bad, thus causing a problem or two I have
been experiencing. I mean, it is not easy to manually push the arm, but it
does move once I push on it hard enough. So I guess the arm and it's
internal spring fine, OK........back outside to start looking at everything
else to test.
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:44 EDT