Oops ... didn't read this one before replying to your other post ;-) I'm not
sure exactly what you mean (the body shop did mine), but if you check out
http://blackdakrt.com/pics/mods/grille/grille4.jpg it shows what Jack
removed before installing his SS grilles.
-- Chuck Robbins '99 Dakota Sport www.intense99dak.com> Oh, one more. Do I need to snip out the horizontal plastic bars when I > put these in, or can I get away with leaving them? > > Chuck Robbins wrote: > > > > The Street Scene grilles have about 3/8" curve. The inserts are attached > > by using "U" clips which slide over the end of the grille and the backside > > of the stock grille. The U clips have a barb which helps hold the SS grille. > > I don't know if Home Depot would have something like this or not. You might > > be able to purchase the clips separately from Street Scene. > > Be sure to let us know how you make out ;-) > > -- > > Chuck Robbins > > '99 Dakota Sport > > www.intense99dak.com > > > > > Has anyone made "po-boy" grill inserts? I found expanded metal at Home > > > Depot pretty cheap and was hoping to use it to make up something like > > > the Street Scenes inserts. Those are curved out...how much curve do I > > > need to throw on them? Best way to secure them? I'm hoping to get away > > > with the same look for under $50 instead of $100+. Paint 'em up, slap > > > 'em in, and I'll be lookin' good. > > > > > > -- > > > -andy > > > > > > http://home.twcny.rr.com/andylevy/ --- andylevy@bigfoot.com > > > ------------------------------------------------------------- > > > modesty, n.: > > > Being comfortable that others will discover your greatness > > > ------------------------------------------------------------- > > -- > -andy > > http://home.twcny.rr.com/andylevy/ --- andylevy@bigfoot.com > ------------------------------------------------------------- > modesty, n.: > Being comfortable that others will discover your greatness > -------------------------------------------------------------
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:26 EDT
