OK, but what casues the Map sensor to read (what is it high boost or vac??)
what it does when it is actually under boost from a supercharger?? Anyway,
how does it normally operate??
TJ
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@buffnet.net>
Sent: Saturday, February 24, 2001 8:19 PM
Subject: DML: RE: recalibrated MAP sensors?
>
> One problem...if you want to change out to a 2-BAR (or 3-BAR) MAP, there's
a
> lot of extra code required in the PCM for that. From the emails I had
> received from three people (who program or have knowledge to program)
these
> PCM's...it's too much of a pain to try to reverse-engineer them. No one
> wants to touch them.
>
> I looked into this when I first installed my S/C and started looking at
the
> MAP signals.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of 1 BAD ARK DKTA .
> Sent: Saturday, February 24, 2001 10:10 PM
> To: dakota-truck@buffnet.net
> Cc: m5sword@aol.com
> Subject: DML: recalibrated MAP sensors?
>
>
> Has anyone seen or used a MAP sensor from Electromotive?
> They have 3 differnt sensors.....1 bar for normally asp
> 2 bar for up to 15 p.s.i. boost
> 3 bar for up to 30 p.s.i.
> if not i will be calling next week to find out more.
>
>
> Steve
> 95 CC 5.2 SLT
> MOPAR : "360-Heads" ,cast valve,and breather covers,R/T package
> cam,underdrive pulleys,7.5mm sparkplug wires,igntion upgrade(made by
> MSD),roller rocker package.
> block bored 30 over, forged pistons,K&N 14x3.
> series 40 Flowmaster 3" pipes(no cat)
> smoothed & painted front bumper,painted grill,Sir Michael's rollpan Le
> Bra bed cover,16" Centerline Aztec.
> 2 DML stickers!!
> Best run: ( yes the track is only 1000ft)
> 11.92 1000ft
> 87.4 mph 1000ft
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:29 EDT