> Hmmm...someone just bought one not too long ago. Hey Kyle, didn't you buy
a
> new IAC, or at least got the cost for one.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Andy Levy
> Sent: Saturday, March 03, 2001 10:05 AM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: Re: DML: RE: Re: RE: Re: Quick D TB!
>
>
> Hm.....now you got me thinking. When I put in my TB, I did clean the
> IAS plunger, but in doing so I grabbed it with a rag and gave it a
> little twist. I can't say for sure if I pulled enoug hto damage it, but
> I have noticed this winter that my engine's been idling pretty rough. I
> thought it was a dirty injector or fouled plug, but after a few bottles
> of STP it's still here.
>
> I'm almost afraid to ask...what's a new one cost? And is there any way
> I can tell, aside from the idle quality, if I b0rked it?
>
> Ronald Wong wrote:
> >
> > Your idle won't be the same.
> >
> > Ron
> > 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> > For modifications see my DML Profile (URL follows)
> > http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
> >
> > -----Original Message-----
> > From: owner-dakota-truck@BUFFNET.NET
> > [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Kyle Kozubal
> > Sent: Saturday, March 03, 2001 9:18 AM
> > To: dakota-truck@BUFFNET.NET
> > Subject: DML: Re: RE: Re: Quick D TB!
> >
> > > On cleaning the IAS Plunger, since you'll have to remove it anyway,
> spray
> > > some Carb Cleaner (or TB Cleaner) on the plunger and gently wipe the
> > carbon
> > > buildup away. Do NOT turn the plunger...just wipe it clean.
> >
> > Bernd, and others,
> > Just curious......but say the 'plunger' did accidentallyu get turned
> during
> > this cleaning process. What would happen?
> > Kyle
> > 93 Dakota 4x4 V6
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:55 EDT