Contact Bruce Bridges at Flometrics for a modified Throttle Body that works
REALLY well on the 3.9's.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
Subject: Re: DML: 3.9 Performance
JBA makes a nice set of headers for the 3.9L. For 1995 and earlier the part
number is 1938. Cheapest place I've seen them is www.truckperformance.com,
they're about $330 for chrome and $470 for ceramic coated.
If you haven't done so already, you can get a huge (and cheap) performance
improvement by buying or building an open-element air intake similar to the
K&N, Mopar or QuickD.
The Jet Stage II chip is said to be excellent for the V6 as well, though I
haven't gotten my own yet.
- Alex
'00 RC SLT V6 5-Speed
Profile: http://www.twistedbits.net/WWWProfile/dakota/SxokV7hSrtCVk
> From: Geoff <geoff_fahl_1@yahoo.com>
> Organization: Twisted Bits Internet Services
> Reply-To: dakota-truck@buffnet.net
> Date: Sat, 17 Mar 2001 22:18:06 -0600
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: 3.9 Performance
>
> Hi,
> I have a 1995 Dakota Sport with the 3.9L I would like to increase the low
> end performance and want to know if any of you have some suggestions or
> experiences that you'd like to share. I already have a TFX cat-back
system
> which made a difference and it sounds pretty good too. I just bought a
new
> MSD ignition controller, wires, and coil but I haven't installed them yet.
> They won't make a big diffrence now but when I reprogram the computer or
add
> a cam it should help. Do you know of any companies that make headers or
> mild cams for this engine? How big of a diffrence would a cam make (both
> performance wise and fuel economy)
>
> If you have any other performance suggestions, please let me know.
>
> Thanks
> Geoff - geoff_fahl_1@yahoo.com
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:15 EDT