RE: Hood not flush - Update

From: Ronald Wong (ron-wong@home.com)
Date: Thu Mar 22 2001 - 11:51:15 EST


If the frame flexed that much, I'd bet it's where the fenders bolt to the
frame.

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of xjruss@iwon.com
Sent: Thursday, March 22, 2001 7:06 AM
To: Dakota Mailing List
Subject: DML: Hood not flush - Update

     I have adjusted everything I can think of on my hood and it still sits
the same. I played with the tow little knobs that support the hood up front
and also adjusted the hood every way possible where it connects to the arms
and where the arms connect to the body. Is it possible the arms are bent
or even the hood itself? It seems to me it the arms were bent, then
adjusting
them would have made some difference, but I didn't see any at all. Anyone
have any ideas?

TIA,

Russ
'99 CC SLT+ V8 4x4 auto
Gibson Stainless Headers and Exhaust
Rancho RS9000s, Amsoil Air Filter,
Magnecore 8mm wires, Amsoil throughout

--
iWon <http://www.iwon.com/> - Voted the #1 portal on the Web!



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:22 EDT