thanks bill
let me know how that goes and how you did it.
i am interested in this and anything that will give me more power.
thanks again
arnold
----- Original Message -----
From: <SEMIHEMI01@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, March 24, 2001 9:54 AM
Subject: Re: DML: bernd where is the IAT sensor on my 4.7
> Arnold,
> The IAT on the 4.7 is located on the drivers side of the intake just
> ahead of the TB mouth. Screws straight down into manifold. It's not as bad
as
> on the other engines because the manifold is made of composit material
and
> does not conduct very much at all. I'm still going to move mine to the
intake
> air stream ahead of the TB.
> Bill
>
> SEMIHEMI01@AOL.COM (Bill C.) 2001 QC, 4.7L, 5spd. 3.55 LSD
> K-N + Cool-Air, Quick-D TB, 10w-30 MOBIL 1, 180 T'STAT, SilBlades
> GIBSON 3" Single Side-Swept cat-back, G-TECH, <A
> HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:24 EDT