Thanks bernd. will i need to increase the gap at all? since it is a stock
coil?
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@buffnet.net>
Sent: Saturday, March 24, 2001 3:05 PM
Subject: DML: RE: Installed the MSD
> Give it a little bit, but the "zing" should be there...a little bit. Try
to
> notice the idle quality, acceleration (smoother or not?) and MPG in the
long
> term.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Paul Bumann
> Sent: Friday, March 23, 2001 2:53 PM
> To: DML
> Subject: DML: Installed the MSD
>
>
> Well i put the MSD in , wired the factory coil into it.
>
> Ok, now where is the ziiing at? It ran pretty much like normal, no Check
> engine light or anything yet. Too early to tell yet?
> Any other MSD stories or advice?
> I put in the 6A box.
>
> Paul
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:25 EDT