Yup...that's exactly right. As for the other older trucks, Richard Pyburn
in his '95 SLT also has one.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Kyle Kozubal
Sent: Tuesday, March 27, 2001 8:13 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: IAT box & dyno results -- tech discussion
Bernd,
I did a brief inspection of the engine bay and immediately found this IAT
sensor. If I understand things correctly, with your box there is no need to
do the IAT relocation, right? Basically, your box will immitate what the
'relocation mod' does, yet your box also allows for us to 'relocate'(so to
say) the IAT with a flip of the switch........and of course fool the PCM by
turning the dial which tells the PCM cooler air is coming in. In a plain
sorta way, is this correct? I like the IAT relocation idea, but I also love
the idea of leaving the IAT in the stock location and having the ability to
flip the switch and turn the adjuster box on. Other than Jon and his 95 Dak,
are there any older trucks running this box?
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:31 EDT