The longer the antenna the lower the frequency it favors. You do recalibrate
after each adjustment because every adjustment causes a change in the power the
transmitter puts out. Easy to remember. high on 1= to short, high on 40= too
long and yes you do want to try to get 1 and 40 equally low and the middle will
work best. Anything under 1.5 os ok though.
>
> your highest and lowest freq. That would be chan1 and chan 40. This way at
> around chan 19 (a popular channel) your swr will be very low.You want to tune
> the ant till the swr on chan 1 matches chan 40.
> Keep adjusting it a little at a time till
> you get it just right.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:35 EDT