Mark, went through this allot with my '96 and you are right. The y-pipe is
different and the reason why is the trans cross member. Been there done that.
Jeff Durling
'01 4x2 QC SLT+
Mark Kuzia wrote:
> I remember talking to JBA about their Y-pipe on this subject, they told me
> that the Y-pipe exits in a different location on the 96 Daks and was unique
> to that year. I asked because I wanted to buy their 96 pipe for my 95, I
> decided against it because I could not determine if the trans cross member
> was different or not. Any early Dak cat-back exhaust should fit, but you may
> have to put a bend in the pipe between the muffler and cat.
>
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 102.45 mph
> 360ci, 5-spd, 4.11 LS(8 3/4 coming soon), Cowl-induction
> (A new E-body 8 3/4 [3.90 SG] has been built by Reider Racing)
> http://www.twistedbits.net/WWWProfile/dakota/FqNiqqo2UjQOY/
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:54 EDT