I also remember dave telling me my combination would be worth 500hp too! HA
HA!
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph
360ci, 5-spd, 4.11 LS(8 3/4 coming soon), Cowl-induction
(A new E-body 8 3/4 [3.90 SG] has been built by Reider Racing)
http://www.twistedbits.net/WWWProfile/dakota/FqNiqqo2UjQOY/
----- Original Message -----
From: "Wisotzkey, Rich" <Rich.Wisotzkey@gd-wts.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, April 02, 2001 11:52 AM
Subject: DML: RE: Re: Camshaft....Roller Lifters?
> If I remember correctly, Bernd weighed the lifters many months ago. The
> difference was something miniscule like 5 grams. I discussed the lifters
> briefly with Dave Hughes a week ago. The stock lifters will stand up to
the
> mid to upper mid 6000's. I also found out the bottom ends of the magnum
> block will stand up to 8000rpms. Not bad!
> Rich - Ashburn, VA
>
> -----Original Message-----
> From: Mark Kuzia [mailto:flyboy01@mediaone.net]
> Sent: Monday, April 02, 2001 11:14 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: Camshaft....Roller Lifters?
>
>
> Make sure you get the Mopar lifters and not the std. factory ones, I had
> both in my hand and there were differences. Supposedly the factory ones
are
> very heavy and have a realistic rev limit up to 5400 rpm, the mopars are a
> little lighter and can rev up to 6400 easily (Mine have been to 6500 rpm,
> 6200 last Saturday!). They sell them individually P4876054, or as a set of
> 16 P5249862. Monicotti Chrysler sell them (set of 16) for $90.30, (810)
> 977-1700.
>
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 102.45 mph
> 360ci, 5-spd, 4.11 LS(8 3/4 coming soon), Cowl-induction
> (A new E-body 8 3/4 [3.90 SG] has been built by Reider Racing)
> http://www.twistedbits.net/WWWProfile/dakota/FqNiqqo2UjQOY/
>
>
>
>
> ----- Original Message -----
> From: <DICEMAN469@aol.com>
> To: <dakota-truck@buffnet.net>
> Sent: Monday, April 02, 2001 10:08 AM
> Subject: DML: Camshaft....Roller Lifters?
>
>
> > Are there any roller lifters available for our magnums? I've been
hunting
> but
> > I can't find anything? Anyone know anything?
> >
> > TIA
> > -Austin
> > Vipertruck
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:55 EDT