Bernd,
No, I didn't say you could do this on a stock magnum. It was my
understanding with modifications to the top end, the stock crank, pistons,
and rods, would hold up to 8000rpms.
Rich
-----Original Message-----
From: bernd@texas.net [mailto:bernd@texas.net]
Sent: Monday, April 02, 2001 8:21 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re: RE: Re: Camshaft....Roller Lifters?
8000rpm from a stock Magnum block?!? Uhhhh...let's ask them if we can go
down
to their shop and watch a stock Magnum block hit 8000rpm on their Dyno (or
in
one of their trucks). This I gotta see!
On the Roller Lifters from Mopar, yes...they were lighter (full) than the
stock
ones.
- Bernd
> I also remember dave telling me my combination would be worth 500hp too!
HA
> HA!
>
> Mark Kuzia
> flyboy01@mediaone.net
>
>
> ----- Original Message -----
> From: "Wisotzkey, Rich" <Rich.Wisotzkey@gd-wts.com>
> To: <dakota-truck@buffnet.net>
> Sent: Monday, April 02, 2001 11:52 AM
> Subject: DML: RE: Re: Camshaft....Roller Lifters?
>
>
> > If I remember correctly, Bernd weighed the lifters many months ago. The
> > difference was something miniscule like 5 grams. I discussed the
lifters
> > briefly with Dave Hughes a week ago. The stock lifters will stand up to
> the
> > mid to upper mid 6000's. I also found out the bottom ends of the magnum
> > block will stand up to 8000rpms. Not bad!
> > Rich - Ashburn, VA
> >
> > -----Original Message-----
> > From: Mark Kuzia [mailto:flyboy01@mediaone.net]
> > Sent: Monday, April 02, 2001 11:14 AM
> > To: dakota-truck@buffnet.net
> > Subject: DML: Re: Camshaft....Roller Lifters?
> >
> >
> > Make sure you get the Mopar lifters and not the std. factory ones, I had
> > both in my hand and there were differences. Supposedly the factory ones
> are
> > very heavy and have a realistic rev limit up to 5400 rpm, the mopars are
a
> > little lighter and can rev up to 6400 easily (Mine have been to 6500
rpm,
> > 6200 last Saturday!). They sell them individually P4876054, or as a set
of
> > 16 P5249862. Monicotti Chrysler sell them (set of 16) for $90.30, (810)
> > 977-1700.
> >
> > Mark Kuzia
> > flyboy01@mediaone.net
> > http://people.mw.mediaone.net/flyboy01/home.html
> > 1995 Dakota 13.79 @ 102.45 mph
> > 360ci, 5-spd, 4.11 LS(8 3/4 coming soon), Cowl-induction
> > (A new E-body 8 3/4 [3.90 SG] has been built by Reider Racing)
> > http://www.twistedbits.net/WWWProfile/dakota/FqNiqqo2UjQOY/
> >
> >
> >
> >
> > ----- Original Message -----
> > From: <DICEMAN469@aol.com>
> > To: <dakota-truck@buffnet.net>
> > Sent: Monday, April 02, 2001 10:08 AM
> > Subject: DML: Camshaft....Roller Lifters?
> >
> >
> > > Are there any roller lifters available for our magnums? I've been
> hunting
> > but
> > > I can't find anything? Anyone know anything?
> > >
> > > TIA
> > > -Austin
> > > Vipertruck
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:56 EDT