Hi Ken,
Oh man, I wouldn't use Windex. It has ammonia in it. That's probably worse
than Armor All. You would probably do better to do with plain water. I
would still look for 303 though.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Kenneth Eng
Sent: Monday, April 23, 2001 8:38 AM
To: 'dakota-truck@buffnet.net'
Subject: DML: Windshield haze - best cleaner to remove it?
I have never applied Armor All on my dash yet I still get the haze on it.
The haze would appear within a month after I clean it would Windex. Is
there anything better than Windex to use. I cleaned it on Saturday in the
shade and this morning with the sun shining through it I noticed that there
were streaks left from the cleaning.
Ken
-----Original Message-----
From: Andy Levy [mailto:andylevy@bigfoot.com]
Sent: Saturday, April 21, 2001 8:58 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Armour All or ?
I'll second that. Ever since I switched from Armor All to 303
Protectant on my inside bits, the "haze" that coated the inside of the
windshield is gone.
Think about it...that haze (from the gases) on the inside of the
windshield from the Armor All - you're BREATHING that stuff.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:08 EDT