8mm is not too large for the stock wire looms. My MSD wires are 8.5mm, and
they fit with a little persuasion.
----- Original Message -----
From: "jay & dana" <jay&dana@telus.net>
To: "DML" <dakota-truck@buffnet.net>
Sent: Tuesday, May 01, 2001 6:53 AM
Subject: DML: Accel plug wires
> To those of you that are using these wires, how do you find the fit at the
> plug and the distributor cap?
> Being 8mm would I be correct in assuming that they are too big to fit the
> stock wire looms on the valve covers? If so, does someone make larger
looms
> that would fit in the same location as the stock Mopar ones?
>
> TIA
> Jay
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:15 EDT