At 09:35 AM 5/5/2001 -0400, you wrote:
>have not been beefed up, lift off the pedal a little to force the shift
>if it doesn't shift around 5200 rpms or you risk bending a pushrod
>or damaging a valve.
I tried letting off to get it to shift on my last run. It did so, but i
had to let off so long that it killed my et. Maybe with some more
experimentation I could get it better, but will definitely work with the
kickdown cable next time around.
My tranny was rebuilt in 94 and has been good ever since. I've been
sitting on a recall since last summer that would "replace the steel manual
valve with an aluminum valve" to correct a problem of the tranny engaging
itself if not put all the way into park. I am somewhat afraid of letting a
dealer play in my tranny. Would this fix help my sticking shifts at all??
Any downsides to the amsoil changeover? I'm running standard mopar atf
thanks
mm
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:25 EDT