I use a pair of channel locks and a square-shafted screwdriver (to prevent
rotation). make sure you're turning it the right way ;) reverse
threads....
On 2001.05.11 22:59 MALDBNSF@aol.com wrote:
> Fan removal? I got a 4.7L and would like to remove the fan and clutch in
>
> order to put in an electric fan. I can't figure out how to remove the
> clutch
> from the water pump shaft! I have a wrench that's fits the LARGE nut or
> whatever it is between the clutch and pump pulley. I'm I barking at the
> right
> tree here? The nut will not break free at all. I found the 4 bolts to
> remove
> the fan from the clutch but that's not much of a help.
>
> The electric fan for the A/C, is that run also by at T-stat for help with
> the
> HP sucking clutch fan?
>
> Don M
>
> Geocities.com/maldbnsf
>
>
>
> '00 QC Bronze, 4.7L, Rest listed at
> http://www.twistedbits.net/WWWProfile/dakota/QwkvWz@DAJFf6/profile.htm
>
>
>
> P.S. Did I mention I love my DAK!!!!!!!!!
>
>
>
>
-- _______________ Jon Smith Raleigh, NC www.fast4x4.net '94 CC 4x4 318 344rwhp/424rwtq ~~~~~~~~~~~~~~~
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:28 EDT