> the should just match up with the colors.. i've done about 20 or 30
stereos
> and just match up the colors......
Ok this is what I thought. I just finished and have 3 extra/non used wires.
Is this right???
>From the Pioneer Factory Connector/Wiring Harness I have an extra:
-Blue Wire; marked 'System Remote'
-Yellow/Black Wire; marked 'Mute'
>From the Gray Connector/Wiring Harness I have an extra:
-Orange Wire; marked Illumination Dash
Should anything be done with these 'extra' or non used wires? Should they be
hooked up into something which I didnt do? All of the wires were used up on
the black connector/wiring harness. From the Pioneer Deck there is a large
thick black wire, which is the ground. I soldered on a 2foot piece of black
wire so I can find a good ground for the deck.....since I didnt see anywhere
within the connectors and harness' to wire this ground into. Is this all ok?
THANKS!!!
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:31 EDT