I looked down inside the intake.Does not appear to have a blown belly pan
gasket.
Also on another note,will it hurt to change my coolant at 32-33,000 miles?
Any preferences on coolant types?
>From: Andy Levy <andylevy@yahoo.com>
>Reply-To: dakota-truck@buffnet.net
>To: dakota-truck-moderator@bent.twistedbits.net
>Subject: Re: DML: Dak now pings on 89 octane,sometimes 90 too
>Date: Sun, 20 May 2001 11:25:04 -0400
>
>Changing brands can definitely help, but be aware that often the same truck
>will stop at several different stations, so you may end up with the same
>gas.
>
>Which plugs are you running?
>
>Have you run a bottle of Techron through recently? That may help.
>
>David D. wrote on Sunday 20 May 2001 11:13:
>
> > I'm going to look down into the TBI for a bad Belly Pan Gasket.
> > Been running Phillips 66 89 octane & 90 Octane.
> > Should i switch to Citgo,and see if it makes a difference?
> >
> > (can switching brands actually make a difference?)
> >
> > Now i only hear the pinging under acceleration,IF the right passenger
> > window is down,and the CD is not playing.Otherwise i cant hear it,and
>i'm
> > still getting 23 mpg on the Interstate @ 60.
> >
> > I just turned 29,000.Plug wires havent been changed yet.Plugs were
>changed
> > out at 19,000.
> >
> > Anyone got any ideas??
> >
> > about 2 tanks ago,i ran a bottle of 104+ through the tank.It really gave
> > me more power.
> >
> >
> >>From: "Steve Wilson" <s2wilson@bellsouth.net>
> >>Reply-To: dakota-truck@buffnet.net
> >>To: dakota-truck-moderator@bent.twistedbits.net
> >>Subject: DML: 3.9 missing and skipping
> >>Date: Fri, 18 May 2001 21:41:19 -0400
> >>
> >>My 95 3.9 started missing and skipping a while back. The code was 14,
>map
> >>sensor. Bought a new sensor from autozone, nothing changed. I traced the
> >>wires and found no broken wires. I took it to a dealer, the mechanic
>told
> >>me
> >>that aftermarket sensors were no good. Said he bet his clothes that the
> >>new sensor was bad, and I needed to get a Mopar map sensor. I bought a
>new
> >>sensor, new plugs and wires, and a new EGR valve. I've taken the
>throttle
> >>body off, cleaned it thoroughly, sprayed carb cleaner through all the
> >>holes to make sure they were clear, installed a new gasket . Still no
> >>change.
> >>Still shows code 14. I've got 19.5 inches of vacuum at the Map sensor
>and
> >>I've traced the wires and they all check out good. I did clear the codes
> >>after each thing I did. Any one have any suggestions?
> >>
> >>
> >>
> >>
> >
> >
> > Digger
> > 00'QC,SLT+,3.9 R/T,42RE,3.55,K&N "Home-Brew" Intake
> > Dynomax Super Turbo,Mobil 1 10w30,Mobil 1 Filter
> > List Moderator: "DodgeDakotaQuadCab@egroups.com"
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >
>
>--
>-andy
>
>http://home.twcny.rr.com/andylevy/ --- andylevy@yahoo.com
>-------------------------------------------------------------
>modesty, n.:
> Being comfortable that others will discover your greatness
>-------------------------------------------------------------
Digger
00'QC,SLT+,3.9 R/T,42RE,3.55,K&N "Home-Brew" Intake
Dynomax Super Turbo,Mobil 1 10w30,Mobil 1 Filter
List Moderator: "DodgeDakotaQuadCab@egroups.com"
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:31 EDT