Well, make sure you get a new set of heavy duty flange gaskets, then see my
earlier post.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Mr.Flipchip
Sent: Saturday, June 02, 2001 7:57 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: Re: RE: Header torque
They are Thorleys and they are used so I have no instructions.
--.com> wrote in message news:001d01c0eb50$a4f67460$05fcf4d3@c7w9g3... > I have pacesetter headers on my Dak, and they are to be torqued to 20 ft > lbs. Which really is not much. You know your spark plugs are torqued to 30 > ft. lbs. > ----- Original Message ----- > From: "Sam Parthemer" <srp@home.com> > To: <dakota-truck@BUFFNET.NET> > Sent: Saturday, June 02, 2001 6:58 PM > Subject: DML: RE: Header torque > > > > You went a little too much >:+? > > > > I believe it depends on the hardware you are using and what > > brand of header. What did you instructions say? > > > > Sam '00 RT > > > > > > > -----Original Message----- > > > From: owner-dakota-truck@BUFFNET.NET > > > [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Mr.Flipchip > > > Sent: Friday, June 01, 2001 7:24 PM > > > To: dakota-truck-moderator@bent.twistedbits.net > > > Subject: DML: Header torque > > > > > > > > > Could someone please tell me what to torque headers to? Hot or cold? > > > I snapped off a grade 8 flange bolt on there and I am not happy!! :-( > > > > > > -- > > > Kirk Johnson > > > > > > > > > > > > > > >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:44 EDT