Re: RE: Re: Re: RE: Header torque

From: Mr.Flipchip (kirk@flipchip.net)
Date: Sat Jun 02 2001 - 13:21:25 EDT

Next message: Val Lowe: "Re: It's Not Coming!"
Previous message: redmopar99: "Re: 99 V6 T-Stat"
In reply to: Ronald Wong: "RE: Re: Re: RE: Header torque"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

I have solid copper gaskets. I just got the broke one out so I will try
again in a bit.

--
Kirk
""Ronald Wong"" <ron-wong@home.com> wrote in message
news:NDBBIHDGKKJOIJDEOCBMMEJPEIAA.ron-wong@home.com...
> Well, make sure you get a new set of heavy duty flange gaskets, then see
my
> earlier post.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Mr.Flipchip
> Sent: Saturday, June 02, 2001 7:57 AM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Re: Re: RE: Header torque
>
>
> They are Thorleys and they are used so I have no instructions.
>
> --
>
>
>
>
> .com> wrote in message news:001d01c0eb50$a4f67460$05fcf4d3@c7w9g3...
> > I have pacesetter headers on my Dak, and they are to be torqued to 20 ft
> > lbs. Which really is not much. You know your spark plugs are torqued to
30
> > ft. lbs.
> > ----- Original Message -----
> > From: "Sam Parthemer" <srp@home.com>
> > To: <dakota-truck@BUFFNET.NET>
> > Sent: Saturday, June 02, 2001 6:58 PM
> > Subject: DML: RE: Header torque
> >
> >
> > > You went a little too much >:+?
> > >
> > > I believe it depends on the hardware you are using and what
> > > brand of header.  What did you instructions say?
> > >
> > > Sam '00 RT
> > >
> > >
> > > > -----Original Message-----
> > > > From: owner-dakota-truck@BUFFNET.NET
> > > > [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Mr.Flipchip
> > > > Sent: Friday, June 01, 2001 7:24 PM
> > > > To: dakota-truck-moderator@bent.twistedbits.net
> > > > Subject: DML: Header torque
> > > >
> > > >
> > > > Could someone please tell me what to torque headers to? Hot or cold?
> > > > I snapped off a grade 8 flange bolt on there and I am not happy!!
:-(
> > > >
> > > > --
> > > > Kirk Johnson
> > > >
> > > >
> > > >
> > > >
> > >
> >
>
>

Next message: Val Lowe: "Re: It's Not Coming!"
Previous message: redmopar99: "Re: 99 V6 T-Stat"
In reply to: Ronald Wong: "RE: Re: Re: RE: Header torque"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:44 EDT