Do I use this only, or in addition to the gasket?
Doug
""Bernd D. Ratsch"" <bernd@texas.net> wrote in message
news:000101c0edbd$5b442b90$040aa8c0@homenet.com...
>
> "Ultra Copper" or "The Right Stuff" works well. Don't use a whole lot
> but enough to form a thin seal around both mating surfaces. Torque it
> down, wait about 10-15 minutes and then recheck the torque on every
> bolt.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Doug Myers
> Subject: DML: belly pan gasket
>
> Hi,
>
> I should be installing my new Hughes' Stage 1 intake on wednesday
> (assuming it shows up today like its supposed to) and I need advice on
> the best way to install the belly pan. I already have the gasket
> #05017208AA. It looks like it has silicone or some kind of rubber built
> in to the gasket between the bolt holes.
>
> Can anyone offer any advice on installing this thing so that it
> won't leak? Should I use RTV only, RTV + gasket, gasket only, gasket
> sealer, yamabond?
>
> Thanks,
>
> Doug Myers
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:44 EDT