I think swapping in a 360 is getting to be a pretty easy situation, now that
they have all these ready-to-go bolt on parts available. I'm surprised Mopar
doesn't have an R/T 360 crate motor with the R/T cam, heads, and M1 intake
assembled for sale, and also while they're at it, maybe a swap kit with all
the parts needed in one package. As soon as its in and running I'll update
my page with as much info on the swap as possible, and good luck on yours
too Mike.
Sam South
95 Dak, 5.2L,3.90 LSD,5-speed(Soon to be 360 powered)
14.10@98.05
http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
http://people.mw.mediaone.net/sawcut64/home.html
----- Original Message -----
From: "Michael Clark" <mike@mikesdakota.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, June 10, 2001 4:00 PM
Subject: Re: DML: Re: 360 MPI short block P5007549
> > Sure have, http://people.mw.mediaone.net/sawcut64/360project.html Just
> > waiting on the Hughes cam and the heads and it should be installed in
the
> > next three weeks.
> > Sam South
> > 95 Dak, 5.2L,3.90 LSD,5-speed(Soon to be 360 powered)
> > 14.10@98.05
> > http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
> > http://people.mw.mediaone.net/sawcut64/home.html
>
> > ----- Original Message -----
> > From: "Michael Clark" <mike@mikesdakota.com>
> > To: <dakota-truck@buffnet.net>
> > Sent: Sunday, June 10, 2001 6:37 AM
> > Subject: DML: 360 MPI short block P5007549
>
>
> >> Has anyone heard of this?
> >> P5007549
> >>
> >> About the 5th one down on this page:
> >> http://www.worldparts.com/worldparts-bin/cart.cgi?kollerdodge|ENG
> >>
> >> This is a magnum block righ?
> >>
> >> Would this just bolt right into my '93?
> >>
> >> What's wrong with the idea of getting one of these, putting some
> >> ported R/T heads on top of it, a good cam, M1, and a 360 computer?
> >>
> >> --Mike
> >> www.mikesdakota.com
> >>
> >>
>
> Great minds think alike huh?! Man is that block a thing of beauty or
> what!
>
> I'm in the planning stages right now
> but I think I'm pretty much set on doing this. Now that my 318 is
> using oil I figure it's getting close to time for at least a rebuild.
> And since I've been sorta planning a 360 swap since the beginning of
> time I figure now is the time to get it done... Best of luck to you,
> and I'll probably have a few questions for you in the near future.
>
> --Mike
> www.mikesdakota.com
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:46 EDT