Bob,
Go here and make your selection.
http://www.taylorvertex.com/spark.html
All the part numbers are here too!
Rich - Ashburn, VA
-----Original Message-----
From: Bob Tom [mailto:tigers@bserv.com]
Sent: Monday, June 11, 2001 7:58 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: LA valve covers on a Magnum Engine
At 07:17 PM 6/10/01 -0500, you wrote:
>Good luck with the Blue Max wires. I had a set and they were the
>worst wires I've ever bought. After removing them a few times the
>plug boots (factory crimped mind you) came off of several wires. If
>you've already got them go ahead and use them just be real careful
>when changing plugs and they may last a little while. I recommend
>Taylor wires, those things are pretty much indestructible. --Mike
Mike
Do you know if Taylor makes a custom set for the magnum 318
(part #?) or do they need to be put together for the magnums? TIA.
Bob Tom Burlington, Ont., Canada
'97 Dakota Sport, 4x2, CC, Flame red, 5.2L, auto., 3.92SG
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:47 EDT