Shawn,
I mounted the pump without the bracket, and placed it behind that brake
line/wire cluster where the frame takes an upward angle. I had to bend the
brake line slightly away from the frame, and it was a tight squeeze, but it
works great. I will try to get some pictures onto my website when I get a
chance.
Get the Paxton air hat, and see my website for details on how to strengthen
the plastic intake tubes.
Bob C.
98 Durango 5.9
http://www.geocities.com/MotorCity/Track/9668/index.html#dHomeStart
""Shawn Bowen"" <Shawn@bowen.com> wrote in message
news:00cb01c0f495$77444080$6401a8c0@neteffect.neteffectcorp.com...
> Sure, check out
> http://home.earthlink.net/~stevenbarlow/PageDurangoInstallSC.htm and look
at
> the bottom picture. This gentleman owns a Durango and has the same
problem.
> Hope he doesn't mind me borrowing that link, very nice of him to have
posted
> his install so far.
>
> Thanks,
> Shawn
>
>
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Bernd D. Ratsch
> Sent: Thursday, June 14, 2001 1:11 AM
> To: dakota-truck@buffnet.net
> Subject: DML: RE: Powerdyne install problem???
>
>
> Got an idea...can you take a picture of the mounting area though. Need
> to see something....
>
> - Bernd
> (Going to bed now)
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net] On Behalf Of Shawn Bowen
> Sent: Wednesday, June 13, 2001 11:51 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Powerdyne install problem???
>
>
>
> Ok, got my PowerDyne in today!!! Bolted on the basics, but I have a
> torsion bar completely blocking where I am supposed to mount the
> Aftermarket Fuel Pump, WTF. Anyone had this issue? I'm debating
> chopping PowerDyne mounting bracket and trying to make it fit. Anyone
> know how much play that bar has up and down while off road? How about
> another mounting location, my only issue is PD gave me enough fuel line
> to mount it there, any ideas???
>
> Thanks,
> Shawn
> 98 5.2L 4x4 CC with a bar in the way!
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:48 EDT