I think the signals come from the transmissions. Even more so on the new
4.7/45FE's.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Bob Tom
Sent: Sunday, June 17, 2001 5:30 PM
To: dakota-truck@buffnet.net
Subject: DML: ? Raising Shift Points
Raising the shift points seems to be always included when sending
off the computer to be reprogrammed. Does anyone know or come
across what inputs the pcm needs and what output signals need
to be sent out to control this? I'm really curious about this.
I have tested a computer that had the shift points raised to 5600 rpm
and, under WOT, whether by manual shift or auto. shift, it did shift
right at 5600. That's about my only experience.
Thanks
Bob Tom Burlington, Ont., Canada
'97 Dakota Sport, 4x2, CC, Flame red, 5.2L, auto., 3.92SG
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:49 EDT