But if you have a 4.7 I believe the Trany is computer controlled vs.
hydraulic like the 3.9, 5.2 & 5.9
-----Original Message-----
From: Kevin [mailto:ksmith@korea.com]
Sent: Tuesday, June 19, 2001 3:04 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: ? Raising Shift Points
He's right, adjusting the TV cable will raise or lower shift points.
----- Original Message -----
From: "frank golembieski" <editzero@yahoo.com>
To: <dakota-truck@BUFFNET.NET>
Sent: Tuesday, June 19, 2001 1:10 PM
Subject: Re: DML: RE: ? Raising Shift Points
> I don't know what the hell you people are talking
> about computer telling the trans? Uh hu well now you
> all need to craw under Thats right under the dakota
> and look at the linkage that goes to the tranny ...
> thats what tells your tranny what gear you are in and
> if you want to raise you shift points i would just
> adjust the cable that comes from the tranny and hooke
> up to the right side of the throttle body . That
> raised my first the second shift point from 1500 to
> 2600 just at a roll not on it or anything ... but if
> you want to get your computer reburned and try it go
> for it.
>
> =====
> Frank G
> http://members.onecenter.com/autoworld/dakota/index.html
> Mopar or no truck
>
> __________________________________________________
> Do You Yahoo!?
> Spot the hottest trends in music, movies, and more.
> http://buzz.yahoo.com/
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:50 EDT