don't be a wimp and just open her up. It's not that bad. if you don't have
a pan to drain the fluid then go buy one. It is really easy. While your in
there inspect the teeth for pitting and that stuff. Also use some brake
cleaner to remove the sludge of metal shavings and fluid at the bottom
(where the magnet is installed). Then cover her up and fill it. Also after
you drive around a mile remove the plug and fill a little more. Good luck
Tim Althoff
http://www.angelfire.com/oh3/yllw/dkta.html
<http://www.angelfire.com/oh3/yllw/dkta.html>
99 Solar Yellow RC V-6 Manual
<http://www.angelfire.com/oh3/yllw/dkta.html>
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of jay & dana
Sent: Monday, June 18, 2001 3:51 PM
To: DML
Subject: DML: Changing diffy fluids
Is there any other way to do this besides pulling the covers off and getting
fluid everywhere, like maybe using some type of pump system?
Thanks
Jay
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:49 EDT