If you're inside the cab the power lead to your radio, if you're in the
engine bay the positive wire to your coil.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Chuck Robbins
Sent: Saturday, June 23, 2001 9:48 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: ignition wire
I am wiring in a LED and need to know what would be a good ignition wire
to tap into. I have one wire as constant power, one wire as a ground and the
third wire (ignition wire) which will provide a 12v input which will shut
the light off (light stays on when ignition is off and goes out when the key
is turned).
This is in a '99 and no, I unfortunately don't have a test light.
Thanks,
Chuck Robbins
'99 Dakota Sport
www.intense99dak.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:51 EDT