That's because I actually used it! Lets see what happens to it when you are
done with your engine swap!
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph
~360ci, 5-spd, 4.11 LS (8 3/4 [3.90 SG] coming soon)
1994 Dakota 15.36 @ 91.56 mph
~318ci, 5-spd, 3.90 LS (bone stock, no mods)
----- Original Message -----
From: "Sam South" <sawcut64@mediaone.net>
To: <dakota-truck@buffnet.net>
Sent: Sunday, July 01, 2001 3:38 PM
Subject: Re: DML: Head gasket thickness
> Thanks muchly Jon, I should have looked in the FSM, just didn't think
about
> it. Although Mark and I went in on the FSM, he spent so much time with it
> last year that when I asked to use it, he handed it to me in several
pieces.
> Not to mention greasy as HELL!!!
> Sam South
> 95 Dak, 5.2L,3.90 LSD,5-speed(Soon to be 360 powered)
> 14.10@98.05
> http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
> http://people.mw.mediaone.net/sawcut64/home.html
>
> ----- Original Message -----
> From: "Jon Smith" <jon@fast4x4.net>
> To: <dakota-truck@buffnet.net>
> Sent: Sunday, July 01, 2001 1:22 PM
> Subject: Re: DML: Head gasket thickness
>
>
> > Page 9-110 on the '95 FSM (Mark should have one there) ;)
> > Cylinder Head Gasket Thickness (Compressed) 1.2065mm (0.0475in)
> >
> >
> > On 2001.07.01 12:57 Mark Kuzia wrote:
> > > Does anyone know what the compressed head gasket thickness is for the
> > > magnum
> > > engine's? I'm checking the piston to valve clearance and need to know
so
> > > I
> > > can add it to my measurements. Thanks
> > >
> > > Sam South
> > > sawcut64@mediaone.net
> > > http://people.mw.mediaone.net/sawcut64/home.html
> > >
> > >
> > >
> > >
> > --
> > _______________
> > Jon Smith
> > Raleigh, NC
> > www.fast4x4.net
> > '94 CC 4x4 318
> > 344rwhp/424rwtq
> > ~~~~~~~~~~~~~~~
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:03 EDT