Ya wanna make a bet...the last tech that was working there doing stuff
like that was fired - Nick.
- Bernd
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of DICEMAN469@aol.com
Sent: Sunday, July 01, 2001 3:16 PM
To: aol@dakota-truck.net
Subject: DML: Powerdyne supercharger belt broke...OOPS!
10523 In a message dated 7/1/2001 12:08:28 PM Eastern Daylight Time,
bernd@texas.net writes:
> They'll know if you swapped out the pulley Tim. There's a sealer that
> they use on the factory pulley and if it's broken, no more warranty.
It
> runs about $450 for a complete rebuild of the Powerdyne (Impeller
> included).
Not true, I sent back my old POS blower twice, all I did was change the
pulley back and I got no problems from them. As a matter of fact, the
second
time I concinced them to give me a replacement blower. Just removed the
11psi
and bolted the 9psi on. If you want to make it a little more believable,
I'd
paint the original pulley to match the truck, then tell them you had to
remove the pulley to paint it, if any questions arise. You confirmed
that you
removed it, and they can't prove you changed it :-)
-Austin
Vipertruck
PS...the first thing I'd do when you get that charger back is sell it on
ebay
and use the money you got to buy a better head unit. I'd do that myself
if I
had the time. After 3 services and a new blower since Dec99, I'm
thoroughly
convinced these things are garbage. No wonder this is the only blower
Turd
Motorsports sells :-)
-Austin
Vipertruck
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:03 EDT