714-639-5220
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Sam Parthemer
Sent: Monday, July 02, 2001 1:19 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: Hello All
The gaskets for the header flange-Y-pipe aren't aluminum from Thorley.
I have 130k on a set of OEM Thorley gaskets on my '95. If you burn through
the next set, give Mike Leach a call and ask what type they use for the
Thorley headers (they make them). Don't have the number off hand, but you
can call information (714) area code, in the City of Orange, CA.
Sam '00 RT & '95 SLT (For Sale)
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of austringer00
> Sent: Monday, July 02, 2001 12:53 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Hello All
>
>
> Hello all, I have been lurking for quite some time now (about a year). I
> have replied to a few questions privately, I just never had
> anything to say
> to the list. I now have something to say: I just melted two aluminum
> collector gaskets. I have ceramic coated Doug Thorley's. The collector
> gaskets that go from the headers to the Y-pipe melted big time.
> The gaskets
> were the Summit Aluminum collector gaskets with stainless hardware. I can
> get a new set at no additional charge, but I won't run these
> gaskets again.
> I don't need any help with this, I just wanted to give everyone a heads up
> on these gaskets.
>
> Troy Sherwood
> 94 CC 4X4
> Reno, NV
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:03 EDT