I keep telling myself to "be at one with the motor grasshopper and all will
go smoothly"......we'll see.
Sam South
95 Dak, 5.2L,3.90 LSD,5-speed(Soon to be 360 powered)
14.10@98.05
http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
http://people.mw.mediaone.net/sawcut64/home.html
----- Original Message -----
From: "Michael Clark" <mike@mikesdakota.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, July 05, 2001 1:27 PM
Subject: Re: DML: Re: roller rockers for dummies
> Be sure to take notes for me Sam!
>
> --Mike
> www.mikesdakota.com
>
> > Cool Jon, I finally got my heads back and I'll be assembling the motor
this
> > weekend, the instructions that come with the Mopar rockers suck,
thanks!!
> > Sam South
> > 95 Dak, 5.2L,3.90 LSD,5-speed(Soon to be 360 powered)
> > 14.10@98.05
> > http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
> > http://people.mw.mediaone.net/sawcut64/home.html
>
> > ----- Original Message -----
> > From: "Jon Smith" <jon@fast4x4.net>
> > To: <dakota-truck@buffnet.net>
> > Sent: Wednesday, July 04, 2001 9:51 PM
> > Subject: DML: roller rockers for dummies
>
>
> >> Just finished documenting the install on my crane RR and stud coversion
> > kit
> >> w/ guideplates no less :) on the page, under how to's section...
next
> >> comes the n2o install :)
> >> --
> >> _______________
> >> Jon Smith
> >> Raleigh, NC
> >> www.fast4x4.net
> >> '94 CC 4x4 318
> >> 344rwhp/424rwtq
> >> ~~~~~~~~~~~~~~~
> >>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:03 EDT