Re: Body Lift Help

• Next message: Mike Pratt: "Gearing size question"
• Previous message: Shawn Englehart: "Re: Cab Mounts."
• In reply to: Shawn: "Body Lift Help"
• Next in thread: ron chapell: "Re: Body Lift Help"
• Reply: ron chapell: "Re: Body Lift Help"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

I figured it out myself, there is an access hole behind the wheel well.

Shawn wrote:

> I was doing a 2in body lift to my 96 club cab and the cab bolt right
> behind the passenger tire will not come out. As far as I can tell,
> there is a small sleeve and a thin nut in a channel and the nut is
> suppose to be tacked to keep from spinning I think or just square and be
> jammed. Of course this was the last bolt I was removing, being behind
> the tire the tip of the bolt rusted as can be seen from the other bolt
> from the driver side. The bolt is part way out and caught on the rust,
> I have sprayed with WD40 now have it completely messed up. I am looking
> for a few ideas before going to a garage before going to a garage and
> having it torched off. Any help would be appreciated. Thanks.
>
> --
> Shawn Englehart
> return email: englehart@sympatico.ca
> www.geocities.com/englehrt
> http://www.dakota-truck.net/profiles/dakota/Yfz3JVR3VIJnE/profile.htm

--
Shawn Englehart
return email: englehart@sympatico.ca
www.geocities.com/englehrt
http://www.dakota-truck.net/profiles/dakota/Yfz3JVR3VIJnE/profile.htm

• Next message: Mike Pratt: "Gearing size question"
• Previous message: Shawn Englehart: "Re: Cab Mounts."
• In reply to: Shawn: "Body Lift Help"
• Next in thread: ron chapell: "Re: Body Lift Help"
• Reply: ron chapell: "Re: Body Lift Help"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:04 EDT