If you change the height it will change the alignment a bit on the front end.
Nospiratus@aol.com wrote:
> Long story made short here.............. dealer I went to had truck for 2
> weeks replacing almost every moving component in the front end trying to
> eliminate the infamous POP. They replaced the tie rod ends, upper and lower
> control arms, upper and lower ball joints, front and rear torsion bar mounts,
> then they sent it to have it aligned. What they didn't do is return my truck
> to its level ride height. (WHen the front and back are even and the truck is
> perfectly level). My question is this, if I crank up the torsion bars in the
> front 1 inch will I need to have the whole thing re-aligned since Im really
> only bringing it back to stock height?? Do i turn the front or rear torsion
> bar mounts and what size socket or tool do I need to do so? Any help is
> appreciated.
>
>
>
> Mike
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:05 EDT