Re: Re: Re: Re: Re: "Advanced" question for the experts

From: Kevin (ksmith@korea.com)
Date: Thu Jul 12 2001 - 03:10:35 EDT


Thanks, I was told by Ronald Wong that the distributor could not be rotated.
----- Original Message -----
From: "Mark Kuzia" <flyboy01@mediaone.net>
To: <dakota-truck@buffnet.net>
Sent: Thursday, July 12, 2001 11:07
Subject: DML: Re: Re: Re: Re: "Advanced" question for the experts

> Counter-clockwise
>
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 102.45 mph
> ~360ci, 5-spd, 4.11 LS (8 3/4 [3.90 SG] coming soon)
> 1994 Dakota 15.36 @ 91.56 mph
> ~318ci, 5-spd, 3.90 LS (bone stock, no mods)
>
>
> ----- Original Message -----
> From: "Kevin" <ksmith@korea.com>
> To: <dakota-truck@buffnet.net>
> Sent: Wednesday, July 11, 2001 4:18 AM
> Subject: DML: Re: Re: Re: "Advanced" question for the experts
>
>
> > Which way would you rotate the distributor to advance the timing?
> > ----- Original Message -----
> > From: "Mark Kuzia" <flyboy01@mediaone.net>
> > To: <dakota-truck@buffnet.net>
> > Sent: Wednesday, July 11, 2001 08:48
> > Subject: DML: Re: Re: "Advanced" question for the experts
> >
> >
> > > The guy at the dealership told me you can advance the timing up to 4
> > degrees
> > > with the distributor. Now that I think about it, you are right on
that.
> > >
> > > Mark Kuzia
> > > flyboy01@mediaone.net
> > > http://people.mw.mediaone.net/flyboy01/home.html
> > > 1995 Dakota 13.79 @ 102.45 mph
> > > ~360ci, 5-spd, 4.11 LS (8 3/4 [3.90 SG] coming soon)
> > > 1994 Dakota 15.36 @ 91.56 mph
> > > ~318ci, 5-spd, 3.90 LS (bone stock, no mods)
> > >
> > >
> > > ----- Original Message -----
> > > From: "Shane Moseley" <smoseley@ix.netcom.com>
> > > To: <dakota-truck@buffnet.net>
> > > Sent: Tuesday, July 10, 2001 6:21 AM
> > > Subject: DML: Re: "Advanced" question for the experts
> > >
> > >
> > > > Actually the distributor "set sync" is not related to ignition
timing
> at
> > > > all - instead it refers to the syncing of the fuel injector firing
> with
> > > the
> > > > intake valve opening event for each cylinder. Hence the term SMPI -
> > > > Sequential Multi Port Injection.
> > > >
> > > > All ignition timing (base + advance) is done in the computer using
the
> > > > crankshaft sensor to reference crankshaft degrees. It looks for its
> > mark,
> > > > waits the appropriate time, then fires the coil. The only time the
> dist
> > > > even comes into the picture is at startup for determining when the
> crank
> > > is
> > > > on the firing stroke.
> > > >
> > > > Hope this helps,
> > > >
> > > > Shane
> > > >
> > > > Mark Kuzia wrote:
> > > >
> > > > > It is a setting for base timing done through a DRB scanner
> > (dealership,
> > > > > unless you want to spend $1200 for one.)
> > > > >
> > > > > Mark Kuzia
> > > > > flyboy01@mediaone.net
> > > > > http://people.mw.mediaone.net/flyboy01/home.html
> > > > > 1995 Dakota 13.79 @ 102.45 mph
> > > > > ~360ci, 5-spd, 4.11 LS (8 3/4 [3.90 SG] coming soon)
> > > > > 1994 Dakota 15.36 @ 91.56 mph
> > > > > ~318ci, 5-spd, 3.90 LS (bone stock, no mods)
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Phil Jenkins" <bugnik@yahoo.com>
> > > > > To: <dakota-truck@buffnet.net>
> > > > > Sent: Monday, July 09, 2001 7:32 PM
> > > > > Subject: Re: DML: Re: Re: RE: "Advanced" question for the experts
> > > > >
> > > > > >
> > > > > > --- Mark Kuzia <flyboy01@mediaone.net> wrote:
> > > > > > > Have you done a "set sync" on the distributor yet?
> > > > > > > My Dak was a little
> > > > > > > doggish in the midrange, until I advance it about 4
> > > > > > > degrees. Before it was 8
> > > > > > > degrees retarded.
> > > > > > >
> > > > > >
> > > > > > Mark,
> > > > > >
> > > > > > What is a "set sync" if you don't mind me asking.
> > > > > >
> > > > > > =====
> > > > > > Phil
> > > > > >
> > > > > > __________________________________________________
> > > > > > Do You Yahoo!?
> > > > > > Get personalized email addresses from Yahoo! Mail
> > > > > > http://personal.mail.yahoo.com/
> > > >
> > > > --
> > > > '96 IndyRam-HisIndy-MPI TB Pulleys RTcam MPComp HVoilpump
> > > > DynaGearDoubleRoller WindageTray CompTAs
> > > > '96 IndyRam-HerIndy-numbered(#142)"Track Truck"
> > > > '74 Triple-Black Dodge Challenger Rallye 360 EFI R&D vehicle
> > > > '93 Dakota CC 318 - soon to be mine 8)
> > > >
> > > >
> > >
> > >
> >
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:05 EDT